Defense systems

From Perpetuum
Jump to: navigation, search


Icon of an armor plate

Armor plates Additional armor plates expand the maximum hit points of the robot.

Icon of an armor repairer

Armor repairers Repairs your own robot's hull on the battlefield.

Icon of a remote armor repairer

Remote armor repairers Fixing other, friendly robots' armor damage, but cannot be used on yourself.

Icon of an armor hardener

Armor hardeners They are designed to provide more defense against a specific damage type.

Icon of a lightweight frame
Lightweight frames
By equipping lightweight frames you actually replace the standard chassis with a lighter one, enabling a faster robot movement. Lighter chassis have less HP, however, and can more easily be slowed by demobilizers because of their lower momentum.
Icon of an armor repairer tuning

Armor repairer tunings Reduce cycle time and improve the repair rate of both remote and non-remote armor repairers.


Icon of a shield generator

Shields are a preventive defense type that protects the hull while using energy from the accumulator. The shield's most important parameter is the absorption ratio which shows how much damage (defined in HP) can be deflected by using up accumulator energy, or AP.

The shield radius is actually the strength of the shield. The smaller this radius, the more energy it needs to protect a large robot. The most efficient defense is to apply a shield with the largest absorption ratio and shield radius on the smallest possible robot.

Icon of a shield hardener

The most significant drawback of shields: when they are on, you cannot use any kind of weapons. Shield hardeners are designed to strengthen the shields you have already equipped. Some EWAR modules can still be used, so experiment!

< Weapons and ammunition | Table of contents | Engineering and electronics >