Calibration template

From Perpetuum
Revision as of 15:33, 7 January 2013 by Goffer (talk | contribs) (Intial article)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

A CT (Calibration Template) is the backbone of your production. It is usually created by [reverse engineering].

The CT has a quality (usually the important value when comparing CTs) and a time efficiency. Quality effects material consumption in production, time efficiency effects duration and costs of production.

The CT will be needed for [production] in [factory]. The usage of a CT for production will reduce the points of the CT. It is possible to combine two CTs of same type to one using the [calibration lab]

A CT for MK2 robots cannot be created by reverse engineering, it has to be obtained by [artifact] searching.