Calibration lab

From Perpetuum
Revision as of 21:19, 5 January 2013 by Celebro (talk | contribs) (Created page with "The '''Calibration lab''' is a facility to combine two calibration templates (CT) that produces the same item, in order to obtain one more efficient CT. This Facility is o...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The Calibration lab is a facility to combine two calibration templates (CT) that produces the same item, in order to obtain one more efficient CT. This Facility is only available on the Modular private colonies (MPC), on Gamma islands.

Since all calibration templates deteriorate and also expire with extended usage. A Calibration lab is an excellent solution which can combine two low point CTs into a single higher production point CT. The end product takes time and money (NIC), these can be reduced with



Facility ratios

Additional parameters that affect your total efficiency.

  • Relation ratio - Improve this factor by reaching a good relationship with the owner of the facility.
  • Discount ratio - Cheaper decoder processing can be had by training the Decoder combination extension.
  • Facility used - Same as all other facilities, the higher the production points the cheaper it is to process decoders.

<Prototyping | Table of contents | Recycling plant >